Skip to content
Minerals & Markets

Seven critical minerals for industrial use.

Product form, chemistry and buyer requirements differ across the portfolio.
Qualification

What matters changes with the mineral.

Unless noted otherwise, the product forms below are targets subject to buyer qualification.

01

Tantalum

Ta–Nb material

Target product form

Assayed Ta–Nb concentrate

What identifies it

Ta₂O₅ / Nb₂O₅ profile and radiological status

What the buyer specifies
  • Ta₂O₅ content
  • Nb₂O₅ content / Ta–Nb ratio
  • U/Th radiological status
  • Moisture and buyer-specified impurities
  • Particle size where required
02

Niobium

Columbite material

Target product form

Characterized columbite / Ta–Nb concentrate

What identifies it

Nb₂O₅ / Ta₂O₅ ratio and mineralogical identity

What the buyer specifies
  • Nb₂O₅ content
  • Ta₂O₅ content
  • Mineral species and composition
  • U/Th and buyer-specific impurities
03

Lithium

Spodumene / lepidolite

Target product formTarget · evaluation required

Spodumene concentrate or lepidolite concentrate

What identifies it

Mineral species, Li₂O, impurity and moisture profile

What the buyer specifies
  • Li₂O content
  • Spodumene vs. lepidolite
  • Fe₂O₃ and buyer-specified chemistry
  • Moisture
  • Particle size / mineralogy where required
04

Tungsten

Wolframite material

Target product form

Wolframite concentrate

What identifies it

WO₃ grade and impurity / radioactivity profile

What the buyer specifies
  • WO₃ content
  • Mo and buyer-specific penalty elements
  • U/Th or radioactivity where applicable
  • SiO₂ / gangue chemistry
  • Physical condition / particle size where required
05

Rare earths

Bastnaesite / monazite

Target product formTarget · assay + evaluation

Bastnaesite or monazite concentrate

What identifies it

Individual REO basket, mineral species and radionuclide profile

What the buyer specifies
  • TREO
  • Individual REO distribution
  • Mineral species
  • U/Th radiological profile
  • Gangue / impurity chemistry and processor compatibility
06

Natural graphite

Flake / amorphous material

Target product form

Graphite concentrate

What identifies it

TGC and physical form / flake-size distribution where applicable

What the buyer specifies
  • Total Graphitic Carbon (TGC)
  • Flake-size distribution where applicable
  • Ash / impurity chemistry
  • Moisture
  • Recovery / purification response where relevant
07

Antimony

Stibnite / Sb material

Target product formTarget · source + buyer qualification

Stibnite / Sb concentrate, where mineralization supports it

What identifies it

Sb grade, mineral species and penalty-element profile

What the buyer specifies
  • Sb grade
  • Mineral species
  • As, Pb, Hg and buyer-specified penalty elements
  • Moisture / particle size
  • Settlement specification
From material to customer

An assay describes the material. A buyer determines its use.

A published grade alone cannot establish suitability for conversion. The combination of mineral species, liberation, impurity behavior and physical condition determines how a material responds in the intended downstream circuit.

01 / Identify

Know the mineral and its composition.

Mineralogy and representative sampling establish which minerals carry the value, how the material occurs and what else is present.

02 / Characterize

Measure more than headline grade.

Assays, impurity chemistry, moisture, size distribution and any relevant radionuclide profile help define the product's qualification pathway.

03 / Match

Start with the downstream process.

Converters, refiners and manufacturers set their own feed requirements. Zilo aligns product form and preparation with those requirements before the lot is offered.

Markets

Where they are used.

Heat, corrosion and wear

Tantalum, niobium and tungsten are used where ordinary materials cannot provide the required heat, wear or corrosion performance.

Energy storage and electrification

Lithium and natural graphite are central to many battery systems. Rare earths support permanent magnets used in motors and other electrified equipment.

Alloys and flame resistance

Niobium, tungsten and antimony can alter strength, hardness, wear or flame behavior even at relatively low additions.

Electrical and magnetic performance

Tantalum and rare-earth elements can provide electrical or magnetic functions that are critical to the finished product.

Looking for one of these products?

Send the product and the specification you are working to.

Buy minerals →